Fundamentals of architecture tests (MTI SYNERGY MosAP a

Answers to the tests MIT MY Synergy MosAP "Fundamentals of Architecture" Score 97 points EXCELLENT. All questions are listed below, the answers are highlighted in the file, after payment you will receive the file.
1. Folded coverings are considered:
2. Why are quarters provided in window openings?
3. What are the partitions based on?
4. Concrete structures that are manufactured at the installation site are called:
5. On what functional requirement does the space-planning decision depend?
6. How many floors cannot a low-rise building have?
7. What element is constructive?
8. The layout of premises in residential buildings is called:
9. Which floors should contain insulation?
10. The connection scheme of the frame is:
11. The process of industrialization in our time:
12. Foundations most applicable for high-rise buildings:
13. The shape of the roof can be:
14. Which vertical support structures are listed?
15. Disadvantages of industrialization:
16. The hall type includes:
17. What floor structures are used in frame buildings?
18. What is a floor?
19. The maximum allowable number of steps in the march:
20. The slope is:
21. What are the requirements of GOST SPDS?
22. What is the difference between load-bearing and self-supporting walls?
23. Layered wall construction:
24. What characterizes well masonry?
25. Premises required for communications within the building:
26. The foundation in the form of rods hammered into the ground and connected from above with a grillage is called:
27. Which hollow core slab size is correct?
28. Classification of public buildings according to capital size with stone walls made of piece stones or large blocks; columns and pillars - reinforced concrete or brick; ceilings - reinforced concrete or stone vaults on metal beams:
29. Characteristics of buildings for hotels, motels and campsites reflect:
30. The upper edge of the intersection of the roof slopes is:
31. Size 250*120*65 belongs to:
32. In prefabricated monolithic buildings, internal walls are always:
33. Can bearing and enclosing properties be combined in one structure?
34. Standardization is:
35. Systems consisting of metal ropes, cables or metal strips and whole sheets
36. Binding of coordination axes is:
37. Controlled air exchange is:
38. The gap between marches is equal to:
39. What is the blind area for?
40. What drainage system does not exist:
41. Tread is:
42. According to the classification of stairs, there are no:
43. What is a room?
44. What is the difference between a basement and a basement?
45. The roof is different from the cover:
46. ​​Reinforced concrete kosour is:
47. The ability of structures to carry a load with minimal deformations predetermined by standards is:
48. What buildings are being built industrially?
49. The awning cover is reminiscent of:
50. In what design can bearing and enclosing functions be combined?
51. Noise is called:
52. Buildings intended for short-term residence of people:
53. Combined roof is:
54. The building of a department store is:
55. The ability of a building to take loads without destruction is:
56. Binding of the coordination axes of internal walls is:
57. The combined carrier frame is more often used in:
58. What elements are part of a flat roof
59. What does the depth of the foundation not depend on:
60. The first distribution room on the way of a visitor entering a public building is:
61. The surface that is obtained by moving a straight line, one end of which moves along a straight line, the other along a circular one, is called:
62. Solid slab foundations are used:
63. What are “subsidence loess” and “loess-like” soils
64. Platform, pinched in the wall with a fence on three sides:
65. Hanging systems, the rigidity of which prevents the occurrence of unacceptable kinematic and elastic deformations, are called:
66. What are the connections between the layers of walls?
67. What is an attic?
68. Fachwerk is:
69. Buttress is: